Product Data Sheet 2746


Nylon casing, backwired.

Hubbell Wiring Device-Kellems Product Specifications
 Device Type  Flanged Receptacle
 Device Style  Twist-Lock
 Amperage  30A
 Volts  3 600V AC
 Poles and Wires  3 Pole, 4 Wire Grounding
 Design Type for Flanged Inlets and Receptacles  Non-Metallic
 Configuration Type  L17-30R
 Terminal Retainer Material  Clear polycarbonate
 Terminal Clamp Material  .08" (2) steel-nickel plated
 Terminal Screw Material  #10-32 Brass (white finish on neutral screw when used) Multi-drive
 Ground Screw Material  #10-32 Brass (green finish) Multi-drive
 Body Holding Screw Material  Steel, zinc plated Multi-drive
 Body Contact Carrier Material  Natural White Nylon
 Contact Spring Material  Brass
 Spring Binding Plate Material  Brass
 Flanged Casing Material  Natural White Nylon
 Mounting Screw Material  Nickel-plated Brass Round head screws
 Ground Contact Material  .031" (.8) Brass
 Ratings  Molded into face.
 Catalog No.  Ink marked on nylon casing.
 Dielectric Voltage Withstand  2,000V minimum.
 Current Interrupting  Certified for current interrupting at full rated current.
 Temperature Rise  Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of .75.
 Terminal Accommodation  30A #10 AWG
 Terminal Identification  Terminals identified in accordance with UL 498 (X, Y, Z, White, Green)
 Flammability  HB or better per UL 94 or CSA 22.2 No. 0.6
 Operating Temperatures  Maximum Continuous 75 C Minimum -40 C (w/o impact)
 Listings  UL/CSA


Hubbell Wiring Device-Kellems