Product Data Sheet    7565


Insulgrip connector, black and white nylon, multiple drive screws.

Hubbell Wiring Device-Kellems Product Specifications
 Device Type  Connector
 Device Style  Twist-Lock
 Amperage  10A/15A
 Volts  250V/125V
 Poles and Wires  3 Pole, 3 Wire Non Grounding
 Design Type for Plugs and Connectors  Insulgrip
 Body Style  Straight
 Configuration Type  Non NEMA
 Cord Dia.  .230"-.720" (5.8-18.3)
 Terminal Retainer Material  Clear polycarbonate
 Housing Material  Black nylon
 Cord Clamp Material  Natural (white) nylon
 Terminal Clamp Material  Cold rolled steel-nickel-plated
 Terminal Screw Material  #8-32 Brass (white finish on neutral screw when used)
 Ground Screw Material  # 8-32 Brass (green finish)
 Cord Clamp Screw Material  Steel, zinc plated Multi-drive
 Body Holding Screw Material  Steel, zinc plated Multi-drive
 Body Contact Carrier Material  Natural White Nylon
 Contact Spring Material  Brass
 Spring Binding Plate Material  Brass
 Ground Contact Material  .031" (.8) Brass
 Ratings  Molded into face.
 Catalog No.  Permanently ink marked on cord clamp.
 Dielectric Voltage Withstand  2,000V minimum.
 Current Interrupting  Certified for current interrupting at full rated current.
 Temperature Rise  Max 30 C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of .75.
 Cord Accommodation  Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49.
 Terminal Accommodation  15A #14AWG
 Terminal Identification  Terminals identified in accordance with UL 498 (X, Y, Z, White, Green)
 Flammability  HB or better per UL 94 or CSA 22.2 No. 0.6
 Operating Temperatures  Maximum Continuous 75 C Minimum -40 C (w/o impact)
 Moisture Resistance  IP20


Hubbell Wiring Device-Kellems