Product Data Sheet   8300


Flush, thermoplastic polyester face, back and side wired, multiple drive screws.

Hubbell Wiring Device-Kellems Product Specifications
 Device Type  Flush Receptacle
 Receptacle Style  Duplex
 Face Shape  Standard
 Standard  NEMA
 Amperage  20A
 Voltage  125V
 Poles and Wires  2 Pole, 3 Wire Grounding
 Wiring Method  Back and Side
 Hospital Grade ?  Yes
 Receptacle Grade  Hospital Grade
 Face Style  Finder Groove
 NEMA No.  5-20R
 Horsepower  1
 Description  Hospital Grade Straight Blade Duplex Receptacle
 Type  2 Pole, 3 Wire, Grounding
 Rating  20A, 125V
 Certification  UL Listed, File E2186, Guide RTRT Fed Spec WC596G, Hospital Grade Meets NEMA WD-1 Heavy Duty and WD-6 requirements Listed to UL Standard 498, Certified to CSA, C22.2, No. 42 where applicable
 Terminal Screw Material  #10-32 Silicon Bronze (Ni plate if neutral)
 Ground Screw Material  #10-32 Silicon Bronze (Green)
 Wire Clamps Material  .031" (.8) Brass - Ni Plated
 Top Material  Impact Modified PBT
 Base Material  Reinforced PET
 Power Contacts Material  .037" (.9) Brass - Ni Plated
 Mounting Strap Material  .050" (1.3) Brass-Ni Plated
 Center Assembly Rivet Material  Silicon Bronze
 Auto Ground Clip Material  Stainless Steel
 Mounting Screw Material  Stainless Steel
 Dielectric Voltage  Withstands 2,000V minimum.
 Current Interrupting  Certified for current interrupting at full rated current.
 Temperature Rise  Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%..
 Terminal Identification  Terminals identified in accordance with UL498 (Brass, White, Green).
 Terminal Accommodation  #14-#10 AWG copper stranded or solid conductor only.
 Product Identification  Ratings are a permanent part of the device.
 Flammability  UL 94 V0 and UL 94-5 VA.
 Operating Temperatures  Maximum continuous 75C, minimum -40C (w/o impact).


Hubbell Wiring Device-Kellems