Product Data Sheet    

HBL3W100



The wired-in surge suppression block design is ideal for areas where space is a major consideration. The surge block can be mounted directly to the panel through a chase nipple connection which will reduce lead length and impedance while increasing protection levels.

An optional version of this product is available without filtering for signal sensitive applications. The nonfiltered version will not interfere with clocking and power line carrier signals (for lighting controls) by allowing safe passage for the control signals while maintaining protection for the sensitive electronic system. The control signals, if filtered, could cause certain systems to go out of synchronization.

Hubbell Wiring Device-Kellems Product Specifications
 Product Type  Panel
 Panel Style  Hard Wired
 Peak Current Rating  100000A
 Voltage  Single Phase 120/240V
 Filter  With Filter
 Panel Type  Branch
 Dimension H  10.6"
 Dimension W  4.75"
 Dimension D  2.6"
 Surge LED  Yes
 Status Alarm  Yes
 Description  100 KA Wired -In Panel Surge Protection Device
 Certification  UL 1449 2nd addition
 UL Clamping Voltage  400V
 Frequency  50/60/400 Hz
 Maximum Surge Current per Phase  100KA
 Maximum surge current per mode  50KA: L-N, L-G, N-G
 Product Warranty  10 Year
 Normal EMI/RFI Rejection (@ 50 Ohms)  Up to -40dB
 Terminal Accommodation  18" #10 AWG Wire Leads
 Thermal Fusing  Yes
 Sine Wave Tracking  Yes
 ANSI/IEEE C62.41 Clamping Voltage:Category A3 200A(Ringwave)  362V
 ANSI/IEEE C62.41 Clamping Voltage:Category B3 500A(Ringwave)  476V
 ANSI/IEEE C62.41 Clamping Voltage:Category C1 3000A(Impulse)  540V
 Housing Rating  Nema 1 Metallic
 Product Weight Pounds  3
 Operating Temperatures  14 to 140 degrees F (-10 to 60 degrees C)

Features/Benefits
Features Benefits
Thermal Fusing Thermal fuse remains functional to prevent the MOV from overheating when exposed to high current levels, a patented Hubbell exclusive.
Compact design Allows installation in areas with space restrictions and helps minimize connecting lead length which can cause impedance.
100KA peak amp capacity Provides high level of protection for equipment under severe electrical conditions.
LED & audible alarm Provides visual and audible indication of suppressor status.
Sine wave tracking Provides uniform clamping throughout the sine wave.

Wired-in products are UL (cUL) Listed to Standard 1449, 2nd Edition.





 

Hubbell Wiring Device-Kellems