HBL2320SW
 |
Gray Valox housing & flange. |
| Hubbell Wiring Device-Kellems Product Specifications | |
|---|---|
| Device Type | Receptacle |
| Device Style | Twist-Lock |
| Amperage | 20A |
| Volts | 250V |
| Poles and Wires | 2 Pole, 3 Wire Grounding |
| Design Type for Receptacles | Watertight Safety Shroud |
| Configuration Type | L6-20R |
| Color |  |
| Horsepower | 2 |
| Terminal Retainer Material | Clear polycarbonate |
| Housing Material | Impact modified PBT |
| Terminal Clamp Material | Steel, nickel plated .080" Curved, scalloped |
| Terminal Screw Material | #10-32 Brass (white finish on neutral screw when used) Multi-drive |
| Ground Screw Material | #10-32 Brass (Green) |
| Body Contact Carrier Material | Natural White Nylon |
| Contact Spring Material | .031" Brass |
| Spring Binding Plate Material | .031" Brass |
| Mounting Screw Material | Stainless Steel 302/304 Multi-drive |
| Ground Contact Material | .031" Brass |
| Rivet Material | Steel |
| Ratings | Molded into body |
| Catalog No. | Marked onto body |
| Dielectric Voltage Withstand | 2,000V minimum. |
| Current Interrupting | Certified for current interrupting at full rated current. |
| Temperature Rise | Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of .75. |
| Terminal Accommodation | 20A-#12AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | VO per UL94 or CSA 22.2 No. 0.6 |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Moisture Resistance | Type 4, 4X, 1, IP66 suitability |
| Flange Gasket Material | Closed-cell Neoprene foam |
| Lid Gasket Material | Closed-cell Neoprene foam |
| Cover Hinge Pin Material | Stainless Steel 302/304 |
| Housing and Flange Material | Gray Valox |
| Cover Spring Material | Stainless Steel 302/304 |
| Listings | UL/CSA |
 |
